H3C S7508E-X, Руководство по установке

Страница: 44 / 111

36
6. On the Settings tab, set the emulation to VT100 and click OK .
Figure 29 Setting terminal emulation in Switch Properties dialog box
Powering on the switch
Before powering on the switch, confirm the following:
•
The switch has been steadily mounted.
•
All the cards have been correctly installed.
• The unused slots have been installed with filler panels.
•
All the network cables, fibers, power cables, and grounding cables have been correctly connected.
•
The input power voltage meets the requirements of the switch.
• The console cable has been correctly connected. The configuration terminal has been started, and
the terminal parameters have been set.
To power on the switch:
Turn on the power supply of the switch to power on the switch.
The following is a sample output you can see on the terminal:
System is starting...
Booting Normal Extend BootWare.
The Extend BootWare is self-decompressing...................................
.....Done!
****************************************************************************