H3C S7508E-X, Руководство по установке

Страница: 41 / 111

33
Figure 24 Connecting a console port to a terminal
Setting terminal parameters
To configure and manage the switch, you must run a terminal emulator program on the console terminal.
If your PC runs Windows 2003 Server, add the HyperTerminal component before performing the
following steps to log in to and manage the switch. If your PC runs Windows 2008 server, Windows 7,
Windows Vista, or other operating systems, prepare third-party terminal control software, and follow the
usage guide or help of the software to configure the terminal.
The following are the required terminal settings:
•
Bits per second —9,600
•
Data bits —8
• Parity —None
•
Stop bits —1
•
Flow control —None
•
Emulation —VT100
To set terminal parameters, for example, on a Windows XP HyperTerminal:
1. Click Start > All Programs > Accessories > Communications > HyperTerminal .
The Connection Description dialog box as shown in Figure 25 appears.
2. Enter a name ( aaa in this example) for the connection, and click OK .