24
Parameters
vlan-interface
: Specifies VLAN interfaces that belong to an OpenFlow instance.
vsi-interface
: Specifies VSI interfaces that belong to an OpenFlow instance. This keyword does not
take effect after it is configured.
l3-physical-interface
: Specifies Layer 3 Ethernet interfaces that belong to an OpenFlow instance.
Examples
# Forbid OpenFlow instance 1 to report VLAN interfaces that belong to the OpenFlow instance to
controllers.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] forbidden port vlan-interface
in-band management vlan
Use
in-band management vlan
to configure inband management VLANs for an OpenFlow
instance.
Use
undo in-band management vlan
to remove the configuration.
Syntax
in-band management vlan
{
vlan-id
[
to vlan-id
] } &<1-10>
undo in-band
management vlan
Default
No inband management VLAN is configured for an OpenFlow instance.
Views
OpenFlow instance view
Predefined user roles
network-admin
Usage guidelines
vlan-id
: Specifies a VLAN ID in the range of 1 to 4094.
Usage guidelines
Traffic in inband management VLANs is forwarded in the normal forwarding process instead of the
OpenFlow forwarding process.
Inband management VLANs are used by an OpenFlow instance to connect to controllers.
Examples
# Configure VLAN 10 as the inband management VLAN for OpenFlow instance 1.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] in-band management vlan 10
mac-ip dynamic-mac aware
Use
mac-ip dynamic-mac aware
to configure an OpenFlow instance to support dynamic MAC
addresses.
Use
undo mac-ip dynamic-mac aware
to restore the default.
