H3C S6890 Series, Справочник по командам Openflow

Страница: 24 / 36

18
Configuration information:
Description : test-desc
Active status : Active
Inactive configuration:
None
Active configuration:
Classification: VLAN, loosen mode, total VLANs(1)
2
In-band management VLAN, total VLANs(0)
Empty VLAN
Connect mode: Multiple
MAC address learning: Disabled
TCP DSCP value: 10
Flow table:
Table ID(type): 0(MAC-IP), count: 0
Flow-entry max-limit: 65535
Datapath ID: 0x0000001234567891
Default table-miss: Drop
Forbidden port: None
Qinq Network: Disabled
TCP connection backup: Enabled
Data-plane: Disabled
Port information:
Ten-GigabitEthernet1/0/3
Active channel information:
Controller 1 IP address: 192.168.49.49 port: 6633
Controller 2 IP address: 192.168.43.49 port: 6633
...
Table 8 Command output
Field Description
Configuration information Information about the configuration.
Description Description of the OpenFlow instance.
Active status
OpenFlow instance status: Active or Inactive .
Inactive configuration Inactive configuration for the OpenFlow instance.
Active configuration Active configuration for the OpenFlow instance.
Classification: VLAN, total
VLANs VLANs that are associated with the OpenFlow instance and the total
number of these VLANs.
loose mode The loose mode is used.
In-band management VLAN,
total VLANs
Inband management VLANs and the total number of them.
Connect mode
Connection mode of the controller:
•
Single —The OpenFlow instance connects to only one controller at a
time.
•
Multiple —The OpenFlow instance can simultaneously connect to
multiple controllers.