H3C S6890 Series, Справочник по командам Openflow

Страница: 21 / 36

15
Field Mask field Description
example, DHCP.
•
Tag —Tag of a route.
Table 5 Actions
Field Description
Drop
Drops the matched packet. This action is not defined in the OpenFlow
specifications.
Output interface
Sends the packet through a specific port. For more information about ports, see
Table 6 .
send length
Specifies the max length of bytes to be taken from the packet and sent to the
controller.
This field appears only when the reserved port of the controller type is specified as
the output port.
Group Specifies a group table to process the packet.
Set queue Maps the flow entry to a queue specified by its ID.
Set field Modifies a field of the packet.
Set MPLS TTL Sets the MPLS TTL.
Set IP TTL Sets the IP TTL.
Push VLAN tag Adds a VLAN tag to the packet.
Push MPLS tag Adds an MPLS tag to the packet.
Pop MPLS tag Removes the outermost MPLS tag from the packet.
Push PBB tag Adds a PBB service tag to the packet.
Pop VLAN tag Removes the outermost VLAN tag from the packet.
Pop PBB tag Removes the outermost PBB service tag from the packet.
Decrement MPLS TTL Decreases the MPLS TTL by 1.
Decrement IP TTL Decreases the IP TTL by 1.
Copy TTL inwards Copies the TTL from the outermost header to the second outermost header.
Copy TTL outwards Copies the TTL from the second outermost header to the outermost header.
Table 6 Ports
Port name Ingress port Output port Description
Normal Not supported. Supported.
Processing the packet by using the normal
forwarding process.
Flood Not supported. Supported. Flooding the packet.
All Not supported. Supported. Forwarding the packet out of all ports.
Controller Supported. Supported. Sending the packet to the controller.
Local Supported. Supported. Sending the packet to the local CPU.
port name Supported. Supported. Valid physical or logical port on the switch.