15
Figure 7
VSI Type List page
d.
Bind the VSI type
VM1 VSI
to the vNIC of VM 1 to define the connection:
i
Select
Connection
from the navigation tree. The
Connection List
page appears.
ii
Click
Add
.
iii
On the page that appears, do the following:
−
Enter
VM1CON
for
Name
.
−
Click
Select
on the right side of the page, select the
VM1
option from the popup window,
and then click
OK
(the MAC address
0050-5684-21c7
of VM 1 is displayed in the
vNIC
field).
−
Select
For FTP
from the
Network
list,
VM1 VSI
from
VSI Type
, and
VM1 VSI (V1)
from
VSI
Type Version
.
iv
Click
OK
.
The connection
VM1CON
is displayed in the
Connection List
page, as shown in
.
Figure 8
Connection List page
4.
Verify the configuration:
After VM 1 starts, the
VAN Connection Manager
service component of IMC deploys the VSI type
VM1 VSI
on EVB bridge 1. Only the R&D center can use the FTP service on VM 1.
