7
Step Command
Remarks
3.
Create an S-channel.
evb s-channel
channel-id
service-vlan
svlan-id
By default, only an automatically
created default S-channel (with
both SCID and SVID as 1) exists on
an interface with EVB enabled.
Configuring an S-channel interface or S-channel aggregate
interface
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter S-channel interface or
S-channel aggregate
interface view.
interface
{
s-channel
|
schannel-aggregation
}
interface-number
:
channel-id
N/A
3.
(Optional.) Configure the
expected bandwidth of the
interface.
bandwidth
bandwidth-value
By default, the expected
bandwidth of an S-channel
interface or S-channel aggregate
interface is the default maximum
bandwidth of the physical port to
which the interface belongs.
4.
(Optional.) Restore the default
settings for the interface.
default
N/A
5.
(Optional.) Configure a
description for the interface.
description
text
The default description information
is "
interface name
Interface."
6.
Bring up the interface.
undo shutdown
By default, the S-channel interface
or S-channel aggregate interface is
up.
Configuring the RR mode for an S-channel
EVB TLVs exchanged through LLDP allow an EVB station and EVB bridge to negotiate the use of reflective
relay. When the EVB station requests the use of the RR mode and the EVB bridge supports the RR mode,
the bridge performs the following tasks:
•
Automatically enables the RR mode for the S-channel.
•
Saves the configuration in the configuration file on the bridge.
You can also manually enable the RR mode for an S-channel by performing this task.
To configure the RR mode for an S-channel:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter S-channel interface
view or S-channel aggregate
interface view.
interface
{
s-channel
|
schannel-aggregation
}
interface-number
:
channel-id
N/A
