H3C S5830V2 series, Справочник по командам, Страница: 39 / 301

27
Views
User line view, user line class view
Predefined user roles
network-admin
Parameters
minutes : Specifies the number of minutes for the timer, in the range of 0 to 35791. The default is 10
minutes.
seconds : Specifies the number of seconds for the timer, in the range of 0 to 59. The default is 0
seconds.
Usage guidelines
The system automatically terminates a user connection if no information interaction occurs on the
connection within the idle-timeout interval.
Setting the CLI connection idle-timeout timer to 0 disables the idle-timeout feature.
This command is available in both user line view and user line class view. A non-default setting in
either view takes precedence over a default setting in the other view. A non-default setting in user
line view takes precedence over a non-default setting in user line class view.
Examples
# Set the CLI connection idle-timeout timer to 1 minute and 30 seconds for user line AUX 0.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] idle-timeout 1 30
line
Use line to enter one or multiple user line views.
Syntax
line { first-number1 [ last-number1 ] | { aux | vty } first-number2 [ last-number2 ] }
Views
System view
Predefined user roles
network-admin
Parameters
first-number1 : Specifies the absolute number of the first user line, in the range of 0 to 192.
last-number1 : Specifies the absolute number of the last user line. This number cannot be smaller
than first-number1 .
aux : Specifies the AUX line.
vty : Specifies the VTY line.
first-number2 : Specifies the relative number of the first user line. The value range is 0 to 128 for the
AUX line and 0 to 63 for the VTY line.
last-number2 : Specifies the relative number of the last user line. This number cannot be smaller than
first-number2 .
Usage guidelines
To configure settings for a single user line, use this command to enter the user line view.