H3C S5830V2 series, Справочник по командам, Страница: 32 / 301

20
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number1 : Specifies the absolute number of a user line, in the range of 0 to 192.
aux : Specifies the AUX line.
vty : Specifies the VTY line.
number2 : Specifies the relative number of a user line. The value range is 0 to 128 for the AUX line
and 0 to 63 for the VTY line.
summary : Displays summary information about user lines. If you do not specify this keyword, the
detailed information is displayed.
Usage guidelines
This command is an older version reserved for backward compatibility purposes. As a best practice,
use the
display line command.
Examples
# Display user line information.
<Sysname> display user-interface 0
Idx Type Tx/Rx Modem Auth Int
0 AUX 0 9600 - N -
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 3 Command output
Field Description
Modem
Whether the modem allows calling in or out. By default, this attribute is not configured and a
hyphen (-) is displayed.
# Display summary information about all user lines.
<Sysname> display user-interface summary
Line type : [AUX]
0:UXXX XXXX XXXX XXXX
…
112:XXXX XXXX XXXX XXXX
Line type : [VTY]
129:UUXX XXXX XXXX XXXX
…