H3C s5820x series Скачать руководство пользователя страница 6

Category Documents 

Purposes 

Installation Manual 

modules available for the products. 

LSW148POEM Module 
User Manual 

Describes the appearance, features, installation, 
and removal of the pluggable PoE module available 

for the products.  

S5820X [ S5800 ] Series 
Ethernet Switches 

Interface Cards User 
Manual 

Describes the models, hardware specifications, 
installation, and removal of the interface cards 

available for the products.  

H3C OAP Cards User 
Manual 

Describes the benefits, features, hardware 

specifications, installation, and removal of the OAP 
cards available for the products.  

H3C Low End Series 
Ethernet Switches 

Pluggable Modules 

Manual 

Describes the models, appearances, and 
specifications of the pluggable modules available 
for the products.  

Power configuration 

S5800-60C-PWR 
Ethernet Switch Hot 
Swappable Power 

Module Ordering Guide 

Guides you through ordering the hot-swappable 
power modules available for the S5800-60C-PWR 

switches in different cases.  

RPS Ordering Information 
for H3C Low-End Ethernet 

Switches 

Provides the RPS and switch compatibility matrix and 
RPS cable specifications.  

Hardware installation 

 

S5800 Series Ethernet 
Switches Quick Start 

 

S5820X Series 

Ethernet Switches 
Quick Start 

 

S5800 Series Ethernet 

Switches CE DOC 

 

S5820X Series 

Ethernet Switches CE 

DOC 

Provides regulatory information and the safety 
instructions that must be followed during installation. 

 

S5800 Series Ethernet 
Switches Quick Start 

 

S5820X Series 
Ethernet Switches 

Quick Start 

Guides you through initial installation and setup 
procedures to help you quickly set up and use your 
device with the minimum configuration. 

 

S5800 Series Ethernet 

Switches Installation 
Manual 

 

S5820X Series 

Ethernet Switches 
Installation Manual 

Provides a complete guide to hardware installation 
and hardware specifications. 

Pluggable SFP[SFP+][XFP] 
Transceiver Modules 

Installation Guide 

Guides you through installing SFP/SFP+/XFP 
transceiver modules. 

 

S5800-60C-PWR 

Switch Video 
Installation Guide 

Shows how to install the H3C S5800-60C-PWR and 
H3C S5820X-28C Ethernet switches. 

Содержание s5820x series



































Отзывы: