4-5
Step5
Click
Properties
in the HyperTerminal window to enter the
Switch Properties
dialog box. Click the
Settings
tab, set the emulation to
VT100
, and then click
OK
.
Figure 4-7
Set terminal emulation in
Switch Properties
dialog box
Booting the Switch
Checking Before Power-On
Before powering on the switch, verify that:
z
The power cable is properly connected.
z
The power supply voltage meets the requirement of the switch.
z
The console cable is properly connected; the terminal or PC used for configuration has been
started; and the configuration parameters have been set.
Powering On the Switch
The S5810 series have the same Boot ROM display style. This document uses the Boot ROM output
information on the S5810-50S as an example:
Starting......
************************************************************************
* *
* H3C S5810-50S BOOTROM, Version 103 *
* *
************************************************************************
Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.