Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-56
z
When the switch fails to communicate with the primary server due to some server
trouble, the switch will actively exchange packets with the secondary server.
z
After the time the primary server keeps in the block state exceeds the time set with
the
timer quiet
command, the switch will try to communicate with the primary
server again when it has a RADIUS request. If the primary server recovers, the
switch immediately restores the communication with the primary server instead of
communicating with the secondary server, and at the same time restores the
status of the primary server on the switch to the active state while keeping the
status of the secondary server unchanged.
z
When both the primary and secondary servers are in the active state, the switch
sends packets only to the primary server.
Related command:
radius scheme
,
primary authentication
,
secondary
authentication
,
primary accounting
and
secondary accounting
.
Example
# Set the status of the secondary authentication server in RADIUS scheme radius1 to
active.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] state secondary authentication active
1.2.26 stop-accounting-buffer enable
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
View
RADIUS scheme view
Parameter
None
Description
Use the
stop-accounting-buffer enable
command to enable the switch to buffer the
stop-accounting requests that bring no response.
Use the
undo stop-accounting-buffer enable
command to disable the switch from
buffering the stop-accounting requests that bring no response.
