H3C S5510 Series, Руководство по управлению

Страница: 30 / 83

Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-27
Parameter
url-string
: URL of the web page used to modify user password on the self-service server.
It is a character string with 1 character to 64 characters. The string must begin with
"http://”, and it cannot contain the character “?”.
Description
Use the
self-service-url enable
command to enable the self-service server location
function
Use the
self-service-url disable
command to disable the self-service server location
function
Use the
undo self-service-url
command to restore the default state of this function.
By default, this function is disabled.
Note that:
z
This command must be used with the cooperation of a self-service-supported
RADIUS server (such as CAMS). Through self-service, users can manage and
control their accounts or card numbers by themselves. A server installed with the
self-service software is called a self-service server.
z
After this command is executed on the switch, users can locate the self-service
server through the following operation: choose [change user password] on the
802.1x client, the client opens the default browser (for example, IE or Netscape)
and locates the specified URL page used to change user password on the
self-service server. Then, the user can change the password.
z
A user can choose the [change user password] option on the client only after
passing the authentication. If the user fails the authentication, this option is in grey
and is unavailable.
Example
# Under the default ISP domain "system", set the URL of the web page used to modify
user password on the self-service server to http://10.153.89.94/selfservice/modPassw
d1x.jsp|userName.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain system
[Sysname-isp-system] self-service-url enable
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName
1.1.26 service-type
Syntax
service-type
{
lan-access
| {
telnet
|
ssh
|
terminal
}* [
level level
] }