Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-53
undo secondary accounting
View
RADIUS scheme view
Parameter
ip-address
: IP address, in dotted decimal notation. By default, the IP address of the
secondary accounting server is 0.0.0.0.
port-number
: UDP port number, ranging from 1 to 65535. By default, the UDP port
number of the secondary accounting service is 1813.
Description
Use the
secondary accounting
command to set the IP address and port number of
the secondary RADIUS accounting server.
Use the
undo secondary accounting
command to restore the default IP address and
port number of the secondary RADIUS accounting server.
You are not allowed to assign the same IP address to both primary and secondary
accounting servers; otherwise, unsuccessful operation is prompted
Related command:
key
,
radius scheme
and
state
.
Example
# Set the IP address and UDP port number of the secondary accounting server of the
RADIUS scheme radius1 to 10.110.1.1 and 1813.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813
1.2.23 secondary authentication
Syntax
secondary authentication ip-address
[
port-number
]
undo secondary authentication
View
RADIUS scheme view
Parameter
ip-address
: IP address, in dotted decimal notation. By default, the IP address of the
secondary authentication/authorization server is 0.0.0.0.
