292
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the
display cwmp configuration
command to display the current CWMP configuration.
Examples
# Display the CWMP configuration when CWMP is enabled.
<Sysname> display cwmp configuration
TR-069 is enabled.
ACS URL :http://www.acs.com:80/acs
ACS username :newname
ACS password :newpsw3
Inform enable status :disabled
Inform interval :600s
Inform time :none
Wait timeout :30s
Reconnection times :Unlimited
Source IP interface :none
Table 68
Output description
Field Description
TR-069 is
The status of CWMP (TR-069), including
enabled
and
disabled
.
ACS URL
URL of the ACS. It is displayed as
null
if not configured.
ACS username
Authentication username for connecting to the ACS. It is displayed
as
null
if not configured.
ACS password
Authentication password for connecting to the ACS. It is displayed
as
null
if not configured.
Inform enable status
Enabled/disabled status of periodical sending of Inform messages
Inform interval
Interval between sending Inform messages
Inform time
Date and time at which an Inform message will be sent. It is
displayed as
null
if not configured.
Wait timeout
Timeout value for the CPE to wait for a response
Reconnection times
Number of attempts the CPE can make to retry a connection
Source IP interface
Interface connecting to the ACS on the CPE. You can set this
interface with the
cwmp cpe connect interface
command.
display cwmp status
Syntax
display cwmp status
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view