153
Default level
2: System level
Parameters
ip-address
: Specifies the IP address of the next hop.
Description
Use the
next-hop
command to configure the next hop IP address for ICMP echo requests of a test group.
Use the
undo next-hop
command to remove the configured next hop IP address.
By default, no next hop IP address is configured.
Examples
# Configure the next hop IP address as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1
nqa
Syntax
nqa
entry
admin-name
operation-tag
undo nqa
{
all
|
entry
admin-name
operation-tag
}
View
System view
Default level
2: System level
Parameters
admin-name
: Specifies the name of the NQA test group administrator who creates the NQA test
operation, a case-insensitive string of 1 to 32 characters, with “-” excluded.
operation-tag
: Specifies the tag of a test operation, a case-insensitive string of 1 to 32 characters, with
“-” excluded.
all
: Removes all NQA test groups.
Description
Use the
nqa
command to create an NQA test group and enter NQA test group view.
Use the
undo
nqa
command to remove the test group.
If the test type has been configured for the test group, you directly enter NQA test type view when you
execute the
nqa
command.
Examples
# Create an NQA test group whose administrator name is
admin
and whose operation tag is
test
and
enter NQA test group view.
<Sysname> system-view
[Sysname] nqa entry admin test