30
Table 4
Power cord connection procedures at a glance
Power module
Connection procedure reference
PSR150-A/PSR150-A1
Connecting the PSR150-A/PSR150-A1
PSR150-D/PSR150-D1
Connecting the PSR150-D/PSR150-D1
PSR360-56A/PSR720-56A/PSR1110-56A
Connecting the PSR360-56A/PSR720-56A/PSR1110-56A
Connecting the PSR150-A/PSR150-A1
The following takes the PSR150-A as an example. The connection procedure for the PSR150-A1 is similar.
To connect the PSR150-A:
1.
Wear an ESD wrist strap and make sure it makes good skin contact and is well grounded.
2.
Attach the hooks of the bail latch (shipped with the power module) into the two holes next to the
power receptacle on the power module, and pull the bail latch leftwards (see
Figure 41
).
3.
Connect one end of the AC power cord supplied with the power module to the power receptacle
(see callout 1 in
Figure 42
).
4.
Pull the bail latch rightwards to secure the plug to the power receptacle (see callout 2 in
Figure 42
).
5.
Connect the other end of the power cord to an AC power outlet.
Figure 41
Connecting the PSR150-A (1)
Figure 42
Connecting the PSR150-A (2)