H3C S5120-EI Series, Руководство по установке

Страница: 60 / 96

4-5
Step5
Click
Properties
in the HyperTerminal window to enter the
Switch Properties
dialog box. Click the
Settings
tab, set the emulation to
VT100
, and then click
OK
.
Figure 4-7
Set terminal emulation in
Switch Properties
dialog box
Booting the Switch
Checking before Powering on the Switch
Before powering on the switch, verify that:
z
The power cord and ground cable are properly connected.
z
The power supply voltage is consistent with that required by the switch.
z
The console cable is properly connected; the terminal (which can be a PC) used for configuration
has been started; and the configuration parameters have been set.
Powering on the Switch
All the S5120-EI series Ethernet switches have the same Boot ROM display style. This document uses
the Boot ROM display of S5120-52C-PWR-EI as an example:
Starting......
***********************************************************
* *
* H3C S5120-52C-PWR-EI BOOTROM, Version 100 *
* *
***********************************************************