16
irf-port
Syntax
irf-port
member-id
/
port-number
undo irf-port
member-id
/
port-number
View
System view
Default level
3: Manage level
Parameters
member-id
/
port-number
: Specifies an IRF port number. The
member-id
argument represents the IRF
member ID
.
The
port-number
argument represents the index of the port on the member switch, and must
be 1 or 2.
Description
Use
irf-port
to enter IRF port view.
Use
undo
irf-port
to remove all port bindings on an IRF port.
To set up an IRF link between two switches, you must enter IRF port view to bind physical ports to the IRF
port used by each switch for IRF connection.
Before removing all port bindings on an IRF port, shut down all its physical ports.
Related commands:
port group interface
.
Examples
# Bind GigabitEthernet 3/0/25 to IRF-port 1 on member device 3.
<Sysname> system-view
[Sysname] interface gigabitethernet 3/0/25
[Sysname-GigabitEthernet3/0/25] shutdown
[Sysname-GigabitEthernet3/0/25] quit
[Sysname] irf-port 3/1
[Sysname-irf-port3/1] port group interface gigabitethernet 3/0/25
[Sysname-irf-port3/1] quit
[Sysname] interface gigabitethernet 3/0/25
[Sysname-GigabitEthernet3/0/25] undo shutdown
irf-port load-sharing mode
Syntax
irf-port load-sharing mode
{
destination-ip
|
destination-mac
|
source-ip
|
source-mac
} *
undo irf-port load-sharing mode
View
System view, IRF port view
Default level
3: Manage level
