7
Description
Use
display
mad
to display MAD status and settings.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP disabled.
MAD LACP disabled.
MAD BFD disabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Current MAD status: Detect
Excluded ports(configurable):
Vlan-interface999
Excluded ports(can not be configured):
GigabitEthernet1/0/25
MAD ARP enabled interface:
Vlan-interface2
MAD enabled aggregation port:
Bridge-Aggregation1
MAD BFD enabled interface:
Vlan-interface3
mad ip address 3.3.3.1 255.255.255.0 member 1
mad ip address 3.3.3.2 255.255.255.0 member 2
Table 5
Command output
Field Description
Current MAD status
MAD status:
•
Detect
—The IRF fabric is integrated.
•
Recovery
—IRF fabric is in Recovery state. When detecting a
multi-active collision, MAD places the IRF fabric with higher master ID
in Recovery state. MAD also shuts down all physical ports in the fabric
except IRF physical ports and ports that are configured to not shut
down.
•
Detect to Recovery
—State of the IRF fabric is transitioning from Detect
to Recovery, for example, as the result of an IRF split.
•
Recovery to Detect
—State of the IRF fabric is transitioning from
Recovery to Detect.
Excluded ports(configurable)
Ports manually configured to not shut down when the IRF fabric transitions
to the Recovery state.
Excluded ports(can not be
configured)
Ports automatically set by the system to not shut down when the IRF fabric
transitions to the Recovery state.
MAD ARP enabled interface:
Vlan-interface2
Interface where ARP MAD is enabled.
MAD enabled aggregation port:
Bridge-Aggregation1
Aggregate interface where LACP MAD is enabled.
MAD BFD enabled interface
Interface where BFD MAD is enabled.
