H3C PSR300-12A Series, Справочник по командам

Страница: 14 / 33

1-7
<Sysname> display mad verbose
Current MAD status: Detect
Excluded ports(configurable):
GigabitEthernet2/0/2
GigabitEthernet2/0/3
Excluded ports(can not be configured):
Ten-GigabitEthernet2/0/25
Ten-GigabitEthernet3/0/26
MAD enabled aggregation port:
Bridge-Aggregation2
MAD BFD enabled interface:
Vlan-interface2
mad ip address 10.0.0.2 255.255.0.0 member 2
mad ip address 10.0.0.3 255.255.0.0 member 3
Table 1-5 display mad command output description
Field Description
Current MAD status
Current state of the MAD detection, including:
z
Detect: Detect state, that is, the IRF virtual device is in a
normal state.
z
Recovery: When multi-active collision occurs, the loser side
enters the recovery state, and all unreserved ports are
automatically disabled.
z
Detect to Recovery: The intermediate state between detect
and recovery.
z
Recovery to Detect: The intermediate state between
recovery and detect.
Excluded ports(configurable) User-configured reserved ports
Excluded ports(can not be configured)
System reserved ports, which do not need to be configured and
are automatically reserved.
MAD enabled aggregation port The aggregation port with LACP MAD detection enabled.
MAD BFD enabled interface The port with BFD MAD detection enabled.
Vlan-interface2
mad ip address 192.168.2.2
255.255.0.0 member 2
mad ip address 192.168.2.3
255.255.0.0 member 3
Information of MAD IP addresses in the IRF virtual device,
including the VLAN interfaces on which MAD IP addresses
have been configured, and the MAD IP addresses on all
member devices.
display switchover state
Syntax
display switchover state [ member-id ]
View
Any view