H3C PSR300-12A Series, Справочник по командам

Страница: 10 / 33

1-3
Examples
# Display the pre-configurations of all members of the current IRF virtual device.
<Sysname> display irf configuration
MemberID NewID IRF-Port1 IRF-Port2
*2 2 Ten-GigabitEthernet2/0/28 Ten-GigabitEthernet2/0/26
+3 4 Ten-GigabitEthernet3/0/25 Ten-GigabitEthernet3/0/27
--------------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
Table 1-2 display irf configuration command output description
Field Description
Switch
Member ID
The ID with * indicates that the device is the master;
The ID with + indicates that it is the device that you are working on.
NewID The member ID configured for a device after its reboot
Priority The priority configured for a device after its reboot
IRF-Port1
Configuration of IRF–Port1. If it is displayed as multiple ports, it indicates that
the IRF port is aggregated from these physical IRF ports; If it is displayed as
disable, it indicates that the IRF port is not enabled.
IRF-Port2
Configuration of IRF–Port2. If it is displayed as multiple ports, it indicates that
the IRF port is aggregated from these physical IRF ports; If it is displayed as
disable, it indicates that the IRF port is not enabled.
display irf topology
Syntax
display irf topology
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display irf topology command to display topology information about the current IRF virtual
device.
The command displays all topology information learned by the current device.
Examples
# Display topology information about the current IRF virtual device.