H3C PSR300-12A Series, Справочник по командам

Страница: 13 / 33

1-6
Layer 3 traffic: destination-ip address, source-ip address
Table 1-4 display irf-port load-sharing mode command output description
Field Description
irf-port Load-Sharing Mode
Global IRF port load sharing mode:
z
If default configuration is applied, port load sharing mode for
processing both Layer 2 and Layer 3 packets is displayed.
z
If non-default configuration is applied, user configured load
sharing mode is displayed.
irf-port 1/1 Load-Sharing Mode
IRF port load sharing mode on IRF port 1/1:
z
If default configuration is applied, the global IRF port load
sharing mode is displayed.
z
If non-default configuration is applied, user configured load
sharing mode is displayed.
Layer 2 traffic: packet type-based
sharing
Default port load sharing mode for processing Layer 2 packets:
uses the combination of both the source and the destination MAC
addresses as the hash key for load sharing.
Layer 3 traffic: packet type-based
sharing
Default port load sharing mode for processing Layer 3 packets:
uses the combination of both the source and the destination IP
addresses as the hash key for load sharing.
destination-mac address, source-mac
address
User configured load sharing mode: uses the combination of both
the source and the destination MAC addresses as the hash key
for load sharing.
display mad
Syntax
display mad [ verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
verbose : Displays detailed information about the MAD detection. If this keyword is not provided, the
system displays brief information about the MAD detection.
Description
Use the display mad command to display information about the MAD detection.
Examples
# Display brief information about the MAD detection.
<Sysname> display mad
MAD LACP enabled.
MAD BFD enabled.
# Display detailed information about the MAD detection.