H3C MSR2600-6-X1, Руководство по установке

Страница: 21 / 43

14
Grounding the gateway through the grounding terminal on the rack
IMPORTANT:
Make sure the rack is reliably grounded before grounding the gateway.
To ground the gateway through the grounding terminal on the rack:
1.
Remove the grounding screw from the grounding hole in the rear panel of the chassis.
2.
Use the grounding screw to attach the ring terminal of the grounding cable to the grounding
hole. See
Figure 12 .
3.
Remove the hex nut from a grounding post on the grounding terminal of the rack.
4.
Use needle-nose pliers to bend a hook at the other end of the grounding cable. Attach the
hook to the grounding post and use the hex nut to secure the hook to the post. See
Figure 13 .
Figure 12 Connecting the grounding cable to the gateway