manualshive.com logo in svg

H3C MSR Router Comware 5 Series, Руководство пользователя

Поделиться
Скачать
H3C MSR Router Comware 5 Series Скачать руководство пользователя страница 145

 

136 

Interface cable 

The FCM interface uses telephone cables with ferrite core. 

 

 

NOTE: 

The standard equipment package for the FIC-6FCM includes the appropriate number of interface 
cables. 

 

Connecting the interface cable 

 

CAUTION: 

•

  Before connecting a port, read its label carefully. A wrong connection can cause damages to the 

interface module and even the device. 

•

  Add a special lightning arrester at the input end of the telephone cable for better protection. 

 

To connect the interface cable: 

1. 

Connect one end of a telephone cable to the RJ-11 or RJ-45 connector of the FCM interface. 

2. 

Connect the other end of the telephone cable to PSTN network.  

Upgrading the FCM module software 

1. 

Download the FCM module software to the CF card or flash card of the router.  

2. 

After the router that is inserted with the FCM module is powered on and starts up, input 

bootrom 

update file cfa0:/ filename slot slotnum all

 in the user mode to upgrade FCM module software. 

3. 

Run the 

display version

 command to display the driver version. If the version number is 

changed, the upgrade is completed.  

The driver version number is just like (Driver) 1.0 in the module information displayed as 
follows:  

[SLOT  5]MIM-6FCM       (Hardware)1.0,   (Driver)1.0,    (Cpld)1.0 

FIC-1E1POS 

Introduction 

The 1-port E1 high-density POS access interface module (FIC-1E1POS) can deal with incoming 
calls from 30 POS terminals at the same time by one E1 interface, and is applicable to the bank data 
transaction center for smart card accounting management.  

Содержание MSR Router Comware 5 Series




























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды