H3C MSR 2600 Series, Руководство пользователя

Страница: 12 / 45

2-3
Mounting the router on a workbench
IMPORTANT:
•
Make sure the workbench is clean, stable, and reliably grounded.
•
Maintain a minimum clearance of 100 mm (3.94 in) around the router for heat dissipation.
•
Do not place heavy objects on the router.
To mount the router on a workbench:
1. Place the router upside down on the workbench and attach the rubber feet to the four round
holes in the chassis bottom.
2. Place the router upside up on the workbench. Make sure the rubber feet stand securely on
the workbench.
Figure2-2 Mounting the router on a workbench
Mounting the router in a rack
The MSR2600-5-GU-CNDE, MSR2600-5-GT-CNDE, and MSR2600-5-LM-CNDE routers cannot
be installed in a rack.
Router dimensions and rack requirements
The MSR2660-XS router is small and does not have rack requirements. For information about the
dimensions of the MSR2660-XS router, see
H3C MSR 2600 Router Series Hardware Information
and Specifications .
Table2-1 Router dimensions and rack requirements
Router model Chassis dimensions Rack requirements
MSR2600-6-X1
MSR2600-15-X1
MSR2600-15-X1-
T
MSR2630-XS
•
Height —44.2 mm (1.74 in)/1 RU
•
Width —360 mm (14.17 in)
•
Depth —420 mm (16.54 in)

300 mm (11.81 in) for the
chassis

60 mm (2.36 in) for connecting
the AC power cord at the front
•
A minimum of 0.6 m (1.97 ft) in
depth (recommended)
•
A minimum of 80 mm (3.15 in)
between the front rack posts and the
front door
•
A minimum of 360 mm (14.17 in)
between the front rack posts and the
rear door