H3C MSR 2600 Series, Руководство пользователя

Страница: 37 / 45

2-28
Starting the router
WARNING!
Before powering on the router, locate the switch for the power source so that you can cut off power
promptly in case of an emergency.
To start the router:
1. Verify the installation and the configuration environment is as described in " Verifying the
installation ."
2. Power on the router.
3. During the booting process, verify the following items:

The LEDs on the front panel are in the states as described in Table2-2 .
Table2-2 LED states when the router is operating correctly
LED State Description
PWR Steady green The power system is operating correctly.
SYS Slowly flashing green The router system is operating correctly.

The configuration terminal displays information correctly.
The router first initializes its memory at startup. Then it runs BootWare.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C MSR2600-10-x1 BootWare, Version 1.07 *
* *
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date : May 6 2015
CPU ID : 0x1
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Flash Size : 2MB
Nand Flash size : 256MB
CPLD Version : 2.0
PCB Version : 3.0
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/msr2600-10-X1-cmw710-system-e0006p05.bin.................
...Done.