Installation Manual
H3C S5600 Series Ethernet Switches
Chapter 1 Product Overview
1-3
The S5600-26F provides 24 x 1000 Mbps SFP optical ports, one Console port, and four
1000 Mbps RJ-45 Combo ports on its front panel. Each SFP port and the corresponding
10/100/1000M Ethernet port form a Combo port. For each Combo port, the SFP port
and the 10/100/1000M Ethernet port cannot be used at the same time. For the
relationship between the Combo ports and the Ethernet ports, refer to Table 1-2.
Figure 1-2. shows the front panel of an S5600-26F Ethernet switch.:
(1) SFP optical port status LED
(2) 10/100/1000M auto-negotiation Ethernet port status LEDs: left one for speed, right one for
duplex mode
(3) Console port
(4) 7-segment digitron display
(5) Power LED
(6) RPS LED
(7) Fabric LED
(8) Module LED
Figure 1-2
Front panel of the S5600-26F
II. LEDs
The S5600-26C/S5600-26C-PWR provides one power LED, one RPS LED, one fabric
LED, one module LED, one mode LED, one 7-segment digitron display, four pairs of
1000 Mbps SFP port status LEDs, and 24 pairs of 10/100/1000M port status LEDs on
its front panel.
The S5600-26F provides one power LED, one RPS LED, one fabric LED, one module
LED, one 7-segment digitron display, 24 pairs of 1000 Mbps SFP port status LEDs, and
four pairs of 10/100/1000M auto-negotiation Ethernet port status LEDs on its front
panel.
Table 1-3 and Table 1-4 describe respectively the LEDs on the
S5600-26C/S5600-26C-PWR and S5600-26F.
