Installation Manual
H3C S5600 Series Ethernet Switches
Chapter 3 Installing the Switch
3-5
Note:
There are three positions to mount a load-bearing screw on both sides of a switch. You
should select a proper position according to the actual requirements. The rear
mounting ears tightly contacted with the load-bearing screws can support the switch.
4) Select a position to install the switch and fix the rear mounting ears to the rear
brackets with screws and captive nuts, as shown in Figure 3-7.
Rear square-holed rack
Figure 3-7
Fix rear mounting ears
5) Hold the bottom of the switch with one hand and the front part of the switch with
the other hand, and pull the switch into the cabinet gently, as shown in Figure 3-8.