Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-11
Table 1-9
Descriptions on the fields of the
display trapbuffer
command
Field
Description
Trapping buffer
configuration and contents
Indicates the current state of the trap buffer and its
contents, which could be enabled or disabled.
Allowed max buffer size
The maximum buffer size allowed
Actual buffer size
The actual buffer size
Channel number
The channel number of the trap buffer, defaults to 3
Channel name
The channel name of the trap buffer, defaults to
trapbuffer
Dropped messages
The number of dropped messages
Overwritten messages
The number of overwritten messages (when the
buffer size is not big enough to hold all messages,
the latest messages overwrite the old ones).
Current messages
The number of the current messages
1.1.8 info-center channel name
Syntax
info-center channel
channel-number name channel-name
undo info-center channel channel-number
View
System view
Parameters
channel
-
number
: Specifies a channel number, in the range 0 to 9.
channel-name
: Specifies a channel name, a string of 1 to 30 characters, case
insensitive. It must be an alphanumeric set startting with a letter.
Description
Use the
info-center channel
name
command to name a channel with a specified
channel number.
Use the
undo info-center channel
command to restore the default name for a channel
with a specified channel number.
Refer to
Table 1-1
for details of default channel names and channel numbers.
Examples
# Name channel 0 as
abc
.
