Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
Chapter 2 RMON Configuration Commands
2-4
including event index, current event state, time the event was logged (the elapsed time
in seconds since system initialization/startup), and event description.
Examples
# Display the RMON log information for event entry 1.
<Sysname> display rmon eventlog 1
Event table 1 owned by user1 is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Table 2-3
Description on the fields of the
display rmon eventlog
command
Field
Description
Event table
Event index
owned by
Owner of the entry
VALID
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means
invalid. You can use the
display rmon
command to
view the invalid entry and with the
display
current-configuration
and
display this
commands
you cannot view the corresponding
rmon
commands.)
Generates eventLog at
Time the log was created
Description Log
description
2.1.4 display rmon history
Syntax
display rmon history
[
interface-type interface-number
]
View
Any view
Parameters
interface-type interface-number
: Specifies a port by its type and number.
