6-9
To do…
Use the command…
Remarks
Configure the keep
alive interval for the
Fat AP
wlan client keep-alive
interval
Optional
By default, keep–alive
function is disabled.
Enable the Fat AP to
respond to broadcast
probe requests
wlan broadcast–probe
reply
Optional
Enabled by default.
Shutting Down a Radio Interface
Follow these steps to shut down a radio interface:
Table 6-3
Shutting Down a Radio Interface
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter radio interface
view
interface wlan-radio
interface-number
—
Shut down the radio
interface
shutdown
Optional
By default, the radio
interface is enabled.
Specifying a Country Code
A country code identifies the country in which you want to operate
radios. It determines characteristics such as operating power level
and total number of channels available for the transmission of frames.
You must set the valid country code or area code before configuring
an AP.
Follow these steps to specify the country code:
Table 6-4
Specifying a Country Code
To do…
Use the command…
Remarks
Enter system view
system-view
—
Specify the country
code
wlan country-code
code
By default, the country
code is US.
