2-2
2) The transmitter module may not be co-located with any other
transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not
be required. However, the OEM integrator is still responsible for
testing their endproduct for any additional compliance requirements
required with this module installed (for example, LVD TV …etc.).
Caution
This module only could work when being installed into “client device”
which could not transmit automatically, such as ROUTER or AP, with
the software driver limit.
IMPORTANT NOTE
In the event that these conditions can not be met (for example certain
laptop configurations or co-location with another transmitter), then the
FCC authorization is no longer considered valid and the FCC ID can
not be used on the final product. In these circumstances, the OEM
integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC
authorization.
WARNING
This Wireless Mini PCI Adapter does not support ad-hoc mode
function.
End Product Labeling
This transmitter module is authorized only for use in module where
the antenna may be installed such that 20 cm may be maintained
between the antenna and users. The final end product must be
labeled in a visible area with the following: “
FCC ID:
U6IRTV1SAPPCID
”.
