H3C BX720E, Руководство пользователя

Страница: 35 / 36

9
2. Set the login parameters and log in to the OM CLI using the remote access software. Table 19
lists the login parameters.
Table 19 SSH login parameters
Login parameter Data
Protocol SSH
Port number
22
Management IP address of the OM module
•
Management IP address (default):
192.168.100.100
•
Subnet mask (default): 255.255.255.0
User name and password used to log in to the
OM module
•
User name (default): admin
•
Password (default): Password@_
•
The SSH access mode is enabled for the OM module by default.
•
The data marked "default" are configured before factory delivery.
•
The data in the table is for illustration only. The actual data during on-site operations shall prevail.
3. After login, the OM CLI displays the login page, as shown below.
******************************************************************************
* Copyright (c) 2004-2019 New H3C Technologies Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<OM>