5
Figure 12 Logging in to the web UI of the OM module
3.
As shown in
, perform the following steps to power off the switch module.
a.
Click
Switch Module
.
b.
Select a target switch module.
c.
Click Power state, and click
Power Off
.
d.
Click
OK
. As shown in the red frame in
, ensure that the switch module is powered
off.
Figure 13 Powering off the switch module
Figure 14 Ensuring that the switch module is powered off
Mode 3: The switch module is powered off through the OM CLI.
On the OM CLI, run the
psu-io
command to power off the switch module.
1.
Set the SSH login parameters and log in to the OM CLI using the remote access software.
