2
Press the line key for the call to user B, and dial user B’s telephone number.
3
When finishing talking with user B, press the line key corresponding to the
call with user A to resume the call with user A and end the call with user B at
the same time.
7.1.6 Use the call waiting function
With this function enabled, you can answer a new call (the call status LED and line switch
LED start to blink) during an on-going call without terminating the current call, and you
can switch between these two calls.
Caution: Before switching a call, you should put the current call on hold. Otherwise, the
current call will be ended.
Step Operation
1
You are on a call and a second call comes in.
2 Press
the
HOLD
key to put the current call on hold.
3
Press the line key corresponding to the second call to answer it.
4
To switch between these two calls, repeat steps 2 and 3.
Caution: Before you switch to another line, you need to put the current line on
hold. Otherwise, the current line will be terminated.
7.1.7 Transfer a call
This feature allows you to transfer an on-going call with one party to another, so that a call
is established between the other two parties. Call transfer functions are classified into
attended transfer (not supported by the EP302-XE2000) and unattended transfer. The
following section describes unattended transfer.
Step Operation
1
You are on a call with one party (user A), and you want to transfer the call to
another party (user B).
2 Press
the
TRANSFER
key.
3
Enter the telephone number of another party (user B).
4
Press the
TRANSFER
key again. Your phone returns to the standby mode
and you can hang up.
9