7 Using the Phone
The operations on the EP302 to receive a call, use the speaker phone function and redial
a number are the same as on other regular phones, and thus will not be elaborated in this
manual. The following sections describe other common functions of the EP302.
7.1.1 Place a call
Pick up the handset, dial the number and press the
Call
soft key.
Whether or not you need to press the
Call
soft key to place a call depends on the dial
rules on the IP PBX.
7.1.2 Use the user directory
Note: The EP302-XE2000 does not have the UsrDir soft key in its main menu and
standby screen and does not support the user directory service described
in this section.
To view the user directory or dial a number from it, press the
UsrDir
soft key in the
standby mode and select the global directory or local directory.
7.1.3 View the call records
To view the call records, press the
Record
soft key in the standby mode.
7.1.4 Forward calls to the voice mailbox
Note: The EP302-XE2000 does not support voice mailbox and thus does not have
the call forward to voice mailbox function.
With this function enabled, all incoming calls will be forwarded to the voice mailbox. The
phone will ring once when a call comes in, and the call is then forwarded to the voice
mailbox (the caller will hear a voice prompt asking him/her to leave a message).
To enable/disable the Call Forward to Voice Mailbox function, press the VMAIL (
) key
on the phone.
7.1.5 Put a call on hold
The call hold function allows you to answer or place a new call without terminating the
on-going call. When this function is used, neither party of the original call can hear the
other side.
To put a call on hold, press the
HOLD
key during an on-going call. The corresponding line
switch LED starts to blink slowly. To resume the call, press the
HOLD
key again.
For example, if you are on a call with user A and you want to place a call to user B, but
you do not want to lose the current call with user A, you can do the following.
Step Operation
1
Put the call with user A on hold.
8