BALL VALVE
MAIN WATER
SHUT-OFF
13
SYSTEM START UP & FLUSHING RO SYSTEM
7. SYSTEM START-UP
1.
With all connections complete, turn on the cold water supply to the filtration system
IMPORTANT!!
The Water Filtration Systems Main Water Shut Off valve
(indicated by the
bright orange tag at the side of the unit)
must be open. This means the blue handle on the
valve must be in the horizontal position.
2.
Immediately check entire water filtration system for leaks. If you notice any leaks turn off
cold water supply and fix the leak.
8. FLUSHING THE WATER FILTRATION SYSTEMS
1.
Open the filtration system faucet and let water run for 5 minutes.
CAUTION!!
If installing the unit in new construction, ensure that house plumbing is flushed
thoroughly before opening the water supply valve.
WARNING!!
Discard all unused parts and packaging material after installation. Small parts
remaining after the installation could be a choke hazard.
