4. WATER FILTRATION SYSTEM PLACEMENT AND MOUNTING
1.
The system does not need to be mounted on the wall of the cabinet and simply sits on
the floor of the cabinet.
IMPORTANT!!
Be very careful not to kink any of the tubing on the water filtration system.
If tubing is kinked the tubing can rupture and leak.
10
5. INSTALLATION OF FLOWLOK LEAK CONTROL VALVE
FLOWLOK is a specially designed shut off valve that turns off your water when a leak is
detected. The FLOWLOK valve uses a compressed textile disc which expands upon water
contact and pushes the valve lever up to the closed position to stop all water flow into the
drinking water system.
NOTE: The FLOWLOK will not shut off any water leak originating from the stop valve or any other connection
which feeds water to it. FLOWLOK is designed to shut off water which is going into the drinking water system
.
(Please note that you can order replacement textile discs through you local dealer in case a disc accidentally
becomes wet and expands.)
WARNING!!!
The FLOWLOK valve MUST be installed to prevent any water leaks occurring
from the drinking water system. Failure to install the FLOWLOK valve will automatically void
the product warranty.
1.
Locate compressed textile disc and set aside.
2.
Place FLOWLOK 2 inches from side wall of
cabinet and 4 - 6 inches from the drinking
water systems inlet side.
3.
Affix the FLOWLOK with screws to the cabinet
base (floor) with screws.
4.
Lift FLOWLOK Lever to off position.
5.
Once final connection is made, remove lever
pusher and insert textile disc with the
pronounced part towards the bottom and
reinsert lever pusher. Lower on/off lever to
allow water to flow thru the system.
UNIT PLACEMENT & FLOWLOK INSTALLATION
WHITE TUBE
(to system INLET)
WHITE TUBE
(from FEEDWATER ADAPTOR)
ON OFF
ON/OFF
LEVER
COMPRESSED
TEXTILE DISC
SCREWS
LEVER
PUSHER
(
U.S.A patent pending
)
