H2I ONEOF Accuracy Motion, Руководство пользователя

Страница: 13 / 37

F. Open the cart and place the watch or piece to
measure.
G. Insert the holding rubber band into the lugs
provided (4) and (5).
The holding rubber band is used to secure the
watch or movement to be measured on the
Accuracy Motion .
It is very important to secure the object to be
measured with the holding rubber band provided
for this purpose. Petitpierre SA and H2i Sàrl cannot
be held responsible for any damage caused by a
falling piece or a watch during a measurement.
FIG. 5-3 - Position the rubber band
2 rubber bands are provided with the Accuracy Motion .
In case of loss or wear, contact Petitpierre SA to get new ones.
H. Start the application.
It is very important not to touch the device during a measurement or during a change of
position.
Installation 12|36