H2flow FlowVis FV-3 Скачать руководство пользователя

Страница: 4 / 16

NOTE:

The above graphic only relates to applications that use erosion style chemical feeders. In all other circumstances, the FlowVis® can

be installed in any of the locations shown.

www.h2flow.net

•

Tel: 888-635-0296 (Toll Free)

(+1) 419-841-7774 (International)

Models & Compatibility cont.

CHLORINE FEEDERS

IMPORTANT DISCLAIMER

Installation locations

Corrosion Resistant Check Valve

Filter

Heater

Chlorinator

1 = Best
2 = Very Good
3 = OK, but not ideal
4 = Bad
5 = Really bad

Material selections such as Viton and Hastelloy c-276 ensure that FlowVis® will provide many years of trouble-free

operation in normally treated, sanitized pool water conditions. However, certain brands and designs of inexpensive

chlorine feeders are known to fail and release high concentrations of chlorine or even chlorine gas into the

surrounding filtration system. When this occurs, any equipment that comes into contact with these abnormal levels

of chemicals, will experience rapid and catastrophic damage. Inspection of any failed components will quickly and

conclusively confirm the cause of the damage, and under these circumstances, the product’s

warranty will be void

Under no circumstances should FlowVis® be used as a ‘check valve’ to prevent the effects of these Chlorine Feeders

damaging other equipment such as Heaters.

COMPATIBILITY

When using the ‘retrofit’ models listed in

Table 3

page 3, it is important to note that each manufacturer’s

valve body design has a unique hydraulic

characteristic that will result in a specific FlowVis®

calibration scale being required. It is therefore

important that you select the correct FlowVis® model

for the particular valve body that is installed in your

system.

NSF 50

Models certified to NSF 50 will display the mark as

shown below:

Содержание FlowVis FV-3

















Результаты поиска

Содержание FlowVis FV-3

Отзывы:

Похожие инструкции для FlowVis FV-3

Бренды по названию

Популярные бренды

H2flow FlowVis FV-3, Руководство по эксплуатации

Результаты поиска

Содержание FlowVis FV-3

Отзывы:

Похожие инструкции для FlowVis FV-3

Бренды по названию

Популярные бренды