H. Winter An-926, Руководство по эксплуатации

Страница: 6 / 27

6
Specifications
Model An-926 An-932 An-940 An-952
Main motor 7.5kw/11kw(opt) 15kw 18.7kw 22.5Kw
Table elevation motor 0.187Kw 0.375Kw 0.375Kw 0.375Kw
Feed motor 0.75Kw
1
.5Kw
1
.5Kw
1
.5Kw
Variable feed speed
(m/min.)
6-18 6-18 6-18 6-18
Cutterhead speed
(RPM)
4500 4500 4500 4500
Cutterhead
diameter (mm)
125 125 125 125
Knife size
(straight Knife)
610*30*3mm 813*35*6mm 1016*35*6mm 1320*5*6mm
Knife size
(Helical cutterhead)
14*14*2.0 14*14*2.0 14*14*2.0 14*14*2.0
Stock thickness
(Min-Max)
6-300mm 8-300mm 8-300mm 8-300mm
Table dimensions
(mm)
660*840 813*100 1016*1100 1320*1100
Dust port (in) 5” 6” 6” 6”
Thickness capacity
(mm)
9mm 9mm 9mm 9mm
Belts four V-belts four V-belts four V-belts four V-belts
Machine Size (mm) 1080*840*1250 1280*100*125
0
1480*1100*1250 1780*1100*125
0
Net weight (kgs) 800 950 1100 1500
Shipping weight
(kgs)
880 1100 1300 1700
Noise level (dB) 70 74 80 83
From the above measured results, this auto planer machine present no severs hearing or noise hazard to
operator, however, the operator is recommended to wear ear caps whenever possible during operation
and conform to the local safety regulations of labours.
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, reserves the right to change specifications at ant time and without prior notice,
without incurring obligations.