5
Introduction
This manual is covering the safe operation and maintenance procedures for a Model An-926/932/940/952
Planer. This manual contains instructions on installation, Maintenance instructions, safety precautions,
General operating procedures and parts breakdown. This machine has been designed and constructed to
provide years of trouble free operation if used in accordance with instructions set forth in this manual. If
there are any questions or comments, please contact either your local supplier
Description
This planer is built for the rugged, industrial environment. It features a Yunnan helical cutter head with
reversible TCT knives, rubber in feed roller with sectional chip breaker, and two rubber out feed rollers.
The in feed and out feed rollers have lever type pressure. The cast iron table are supported by four
massive columns, and the planer frame is built with heavy plate steel, this machine will not vibrate under
load. Knife changes are quick with the self-seating knives. The planer will accommodate rough to finish
work, and multiple piece planning.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor
injury and/or possible machine damage.
This means that if precautions are not heeded, it may result in serious
injury or possibly even death
----------Save these instructions-----------
