|
17
Water Level Switch WPS 5000
safety InstructIons
The following safety instructions are not only for the safety and protection of
the device, but also for the protection of your own safety and health. Please
read and follow them carefully. This user guide contains information about the
installation, service and maintenance of your device. If you should pass the
device to another person, do not forget to include this user guide.
In no event will liabilities be taken for consequential, incidental, direct or indirect
damages resulting from improper use of the device according to the user guide.
The warranty expires, if the instructions in the user guide are not followed or the
device is used in any other way as intended.
All persons using, handling, installing, servicing and maintaining this device
must be trained and qualified for handling, installing and repairing this device
and follow this user guide. This device may only be opened or repaired by a
person authorized and qualified to do so and/or who has the knowledge of
electrical safety regulations. If the device is opened there is a risk of electric
shock. Disconnect the device from the mains before opening the device.
technIcal Data
– Operating voltage: 230 V/50 Hz
– Output voltage: (via wall socket) 230 V/50 Hz
– Power consumption: max. 3,5 W
– Switching capacity: max. 2500 W
– Delay On / Off: 1...9999 secs. adjustable
(about 2,8 hours)
– Triggering sensitivity: 10...200 kOhm adjustable
– Display: 4-digit 7-segment LED display and three LEDs
– Operating range: –15°C / +40°C
– Protection: IP 20
– Cable length (sensor): 30 meters
– Delivery includes: 1 sensor
