technical data
file: n:\article\cos14310m5-v1_07hpc-en\20130207_cos14310m5-v1.07hpc-en_h-p-cosmos_treadmill_manual.doc
© 2013 h/p/cosmos sports & medical gmbh author: fh [email protected] created 07.02.2013 printed 04.03.2013 page: 151 of 197
pulsar
®
3p
locomotion
®
190/65 3p med
h/
p/
cosmos pulsar 3p
h/
p/
cosmos pulsar 3p lt
h/
p/
cosmos locomot
ion 190/
65-3p E med
h/
p/
cosmos locomot
ion 190/
65-3p DE med
Dimension of running surface
length x width
1900 x 650 mm
Dimension frame
length x width x height
2500 x1050 x 1450 mm
(UserTe 150 mm width)
2500 x1150 x 1450 mm
(seats + 400 mm width)
Track access height from floor
230 mm
Weight of device
385 kg
600 kg
Weight load limits to floors
(traffic load to DIN 1055 part 3)
5.9 kN/m²
6.1 kN/m²
In case of any further questions related to load limits onto floors, please ask our service department.
Max. permissible user weight
200 kg (deviation on request specially made)
Environmental conditions:
Transport and storage
temperature: –30...+50 °C, humidity: 0...95 % - without condensation
barometric pressure: 700...1060 hPa
Environmental conditions:
Operation
temperature: +10...+40 °C (deviation on request), humidity: 30...70% - without condensation
(up to 95% on request), barometric pressure: 700...1060hPa
Maximum operating altitude: approx. 10,000 feet (3000m), without pressurization
Pollution degree
Degree 2: Normally only nonconductive pollution. Temporary conductivity caused by condensation is to be expected.
Central lubrication system
manual
Number of stored programmes
6 training profiles / 10 test profiles / 8 user definable profiles
RS232 Digital interface / serial
port
(USB-converter optional)
COM1 and COM2: standard
COM3: optional (standard for service)
COM4: n.a. (used for POLAR W.I.N.D.)
COM1 and COM2: standard
COM3: n.a. (used for UserTerminal TouchScreen)
COM4: n.a. (used for POLAR W.I.N.D.)
Heart rate measurement and
heart rate dependent endurance
control
POLAR W.I.N.D. with WearLink
transmission range approx. 10 m
PC software
h/p/cosmos para control
®
and
h/p/cosmos para graphics
®
included
Reverse belt rotation / downhill
standard
Safety Arch with chest belt
system***
option
Handrails
options: short, long, crossbar (standard)
as standard: adjustable with gas spring support
Arm support / additional keyboard
option
no arm support; additional keyboard is standard
* Overload and weak power supply (under voltage) could lead to higher discrepancies concerning the speed display or dripping of the fuse.
** The time of operation of the elevation motor (TO = 15 %) converts to approx. 5 full elevation cycles. Overload can result in temporary tripping of the fuse,
but can be used again after short cool down period. Treadmills of the h/p/cosmos saturn series built approx. before January 2007 have a maximum
elevation of 25 %.
*** For maximum stress tests and with oversize running machines (track sizes) a safety facility (e.g. a safety arch with chest belt system) is necessary and
highly recommended. When using a front-bar handrail (crossbar), the speed is limited to 5 km/h for safety reasons. Data of weight and measurements can
deviate.
Ask for further details and optional equipment or visit www.h-p-cosmos.com. Subject to technical alterations without prior notice. E & OE.
