35
TLC 2100
271-0498-4852503#
The Extended Commands are entered by pressing the "Greater Than" key ">"
and an alphanumeric key. These commands are also case sensitive.
> A
Set/Read Alarm Record Setup
> C
Set/Read System Code, up to 24 characters
> D
Set/Read Date
> O
Set/ReadCamera Switcher Pulse Output
> P
Set/Read Timer Program
> T
Set/Read Time
> V
Read Firmware versions
> t
Tape End Reset (command format is >ter)
Notes:
Set Date Command
syntax:
>D<Month><Day><Year><Weekday>
Parameters:
<Month> =[01....12] *
<Day> =
[01....31] *
<Year> =
[00....99]
<Weekday> =
[1....7] [1 (Sunday), 2 (Monday)....7 (Saturday)]
* Note: you must enter a zero before a single digit for both month and
day. Eg. "3" must be entered as 03.
Entry of the Weekday parameter is optional as it is automatically
calculated by the software.
An error response will occur for illegal dates, such as Feb. 30 or Nov. 31.
Reply
"*" if correct
"?" followed by "*" on next line if incorrect
Read Date Command
Syntax:
>D
Reply:
<Time><Space><Date><Space><Weekday>
Example:
18:58:36 03/06/96 Sun
Set Time Command
syntax:
>T<Hours><Minutes><Seconds>
Parameters:
<Hours> =
[00....23] (24-hour format)
<Minutes> =
[00....59]
<Seconds> =
[00....59]
Extended
Commands
NOTE: The Extended
Commands may also
be used to enquire
about the specific
setting of each com-
mand by entering the
command without
data.
Set Date
Command
Read Date
Command
Set Time
Command
