GYS TITAN 400 DC, Руководство пользователя

Страница: 27 / 120

27
TITAN 400 DC
EN
4T x 4T torch mode.
4T LOG x 4T LOG torch mode.
SPOT x Standard spot welding mode with flat current.
TACK x Spot welding mode with a mix of flat and pulse current.
PULSE x Pulse TIG welding mode.
E.TIG x Welding mode with constant energy.
LOCK x x Lock and unlock button (pressed for 3 seconds).
JOB x x Button to access the JOB menu (save and recall a program).
Gas purge x Torch purge activation button.
Thermal protection x x Standard symbol to indicate the thermal protection state.
ELECTRODE WELDING (MMA)
CONNECTIONS AND RECOMMENDATIONS
• Connect the electrode holder and earth clamp to the corresponding sockets.
• Ensure that the welding polarities and intensities indicated on the electrode packaging are observed.
• Remove the electrode from the electrode holder when the machine is not in use.
• The machine has 3 features exclusive to Inverters:
- The Hot Start creates an overcurrent at the beginning of the welding.
- The Arc Force creates an overcurrent which prevents the electrode from sticking to the weld pool.
- The Anti-Sticking technology makes it easier to unstick the electrode from the metal. .
MMA WELDING PROCESSES
• MMA STANDARD
The MMA STD mode is recommended for most applications. It can weld any type of electrode : rutile, basic, cellulosic... and on any material: steel,
stainless steel, cast iron.
I
+ -
MADE IN FRANCE
JOB
OK
%
I
MMA PULSE
TIG HF TIG
lift
2T 4T 4T
LOG
SPOT TACK PULSE
E. TIG
A
t(s)
%
V
Hz
kJ
A
FREQ.
BAL.
%I
%t
Hz
I
setup
A
Process MMA STD
The grey areas are not useful for this mode.
HotStart
Arc Force
Adjustable values 0 - 100% -10 à +10
Recommendations:
• Low Hot start, for thin sheets, high Hot start for difficult-to-weld metals (dirty or oxidised).
• The Arc Force is set between -10 and +10. It needs to be combined with the choice of type of electrodes selected in the Advanced Menu (refer to
Advanced Menu section).