12
NOMAD POWER 15 AIR
EN
PROTECTIONS
This device is protected against short-circuits, overloads, deeply discharge and polarity inversions.
ANOMALIES, CAUSES, REMÈDES
TROUBLESHOOTING
CAUSES
REMEDIES
1
No response while pressing the ON/
OFF button
The NOMAD POWER is discharged.
Charge the product (see page 9).
2
«Error» light ON on the jumper
cable.
Internal battery voltage < 11.0V.
Charge the product.
3
«Error» light flashes red + alarm
beep.
Polarity reversal
Check that the clamps are well connected and unplug/plug back the jumper
cable.
Short-circuit
Check that the clamps are well connected and unplug/plug back the jumper
cable.
Clamps have been left connected to the battery.
Remove the 2 clamps from the car battery in order to protect the device.
4
The device is warm whilst connected
to a laptop.
-
Remove laptop’s battery or unplug the NOMAD POWER from the laptop for 5
minutes and plug it back again.
