ERGO LIFT 650
1
Safety and functional check
In order to guarantee that your ERGO LIFT 650 lift has been manufactured in strict compliance with
safety standards, here are the results of the tests that your product has been subjected to before
shipment (please always keep this manual provided when you purchased the equipment).
The following elements are present:
Technical notice board on the back of the hydraulic power station.
Serial numbers on the technical notice board and on the lift.
Instructions for use
Maximum authorised load capacity of 2,000 kg.
Raise "
↑
" and lower "
↓
" on the cable control.
CE identification on the lift.
Controlled operation and safety:
Pressure relief valve set at 140 bar max.
Verify:
No-load function test over a complete cycle
Operation of the emergency stop button
Controls automatically return to initial position
No damage to the cylinders, the power supply cable, and the wired remote control cable
Tight fastening of all bearing screws
Condition of the hydraulic hose (tightness and watertightness of all connections)
Operation with the maximum load over a complete cycle
Checking the function of the safety device in the event of a hydraulic hose rupture under load.
Serial No
Date:
Name or controller number:
EC Certificate of Conformity
You can download the certificate of conformity from our website: www.gys.fr.
heading: PRODUCT_CARROSSERIE_CARROSSERIE_LEVAGE
