24
User manual
GYSPRESS PREMIUM 10T PUSH-PULL
Translation of the original
instructions
DEFECTS, CAUSES, AND SOLUTIONS
The chart below indicates the issues that can be observed during the use of the product. If the problem observed does not appear in the table
below, stop using the product and call your distributor in order to find out the procedure you need to follow.
TROUBLESHOOTING
CAUSES
SOLUTIONS
The riveting machine does not
work.
Air supply is not attached.
Connect the compressed air.
Air pressure too low.
Check air pressure supply.
The air pressure is not adjusted properly.
Set the compressed air to between 2 and 6.5 bar.
The potentiometer is set to the minimum setting.
Adjust the driving speed.
The rivet is not in place.
Defective chuck or die.
Replace the chuck or the die.
Presence of glue on the chuck or inside the die.
Clean off the adhesive
The pressing pressure is not enough.
Air pressure is too low or not well-ajdusted.
Rivet length wrong.
Follow manufacturer instructions.
Air, leakage.
Faulty pipe.
Change the pipe.
Faulty coupling.
Change the coupling.
Faulty seals.
Repair required by the manufacturer.
OPTIONS (NON-EXHAUSTIVE LIST)
Riveter support for changing accessories
054158
Workstation trolley
054233
Workstation t support
055391
Pressure sensor
062115
Adapter 24 kN for blind rivets
Standard
063822
Compact
077164
Adapter 50 kN for blind rivets
064867
Find all riveting accessories and dies on www.gys.fr
WARRANTY CONDITIONS FRANCE
The warranty covers any defects or manufacturing faults for two years from the date of purchase
(parts and labour).
The warranty does not cover:
• Any other damage caused during transport.
• The general wear and tear of parts (i.e. : cables, clamps, etc.).
• Incidents caused by misuse (incorrect power supply, dropping or dismantling).
• Environment-related faults (such as pollution, rust and dust).
In the event of a breakdown, please return the item to your distributor, along with:
- a dated proof of purchase (receipt or invoice etc.).
a note explaining the malfunction.
